Product details
- Package Dimensions : 7.8 x 7.44 x 1.42 inches; 2.09 Pounds
- Item model number : Metal
- Date First Available : October 8, 2022
- Manufacturer : Fourtry
- ASIN : B09D77KN6T
- Country of Origin : China
- Best Sellers Rank: #150,898 in Patio, Lawn & Garden ()
- #173 in
- Customer Reviews:
Product Description
Flat Idler Pulley replaces for Toro 116-4667, 1-633109, 132-9424, Exmark 116-4667, 126-7685
When do you need to replace mower pulley?
- If a pulley is badly worn, it can cause a bad vibration from the cutting deck on your lawn tractor. To check all your pulleys, start by removing the mower deck. Next, remove the mandrel covers and belt, then check all the pulleys for play and roughness when spinning. Be sure to check the inside of the pulleys for wear, or any other signs of damage. If you notice any of these signs, you should replace the pulley.
Tips for installation
- When changing the deck idler pulley, it is advised that you also replace the associated belt to ensure the best performance.
Notice
- Please double check the idler pulley is in the deck system, because there are different sizes of idler pulley in the mower.
- Typically, on Exmark Mowers there are two Idler pulleys mounted to the deck and one on the Idler Arm and vary in size. And on Toro mower there are three, please make sure this 116-4667 is for the deck assembly system.
To complete this repair you would need a Wrench and Pliers.
- Remove mower deck
- Loosen bolt that secures the pulley and remove Drive belt
- Remove bolts and washers from pulley
- Replace the old Pulley with a new one
- Secure the pulley and install the belt
- Reassemble mower deck
Why choose Fourtry?
|
|
|
---|---|---|
Pre-greased bearing
|
Antiskip flanges
|
Heavy duty pulley
|
Idler pulley Replace Part Numbers:
- for Toro 116-4667, 1-633109, 132-9424
- for Exmark 116-4667, 126-7685
- for Oregon 78-011
- for Rotary 9864
- for Prime Line 7-052046, 280-862.
Note: Please use the part number and description to see if the deck idler pulley will fit on; also please double check the idler pulley is in the deck system, because there are different sizes of idler pulley in the mower.
Compatible with following mowers (but not limited to):
Replacement toro zero turn mower part for:
1. Toro Z master zero turn mower:
- 742: 74237, 74237CP, 74238,74238CP, 74239, 74242, 74247, 74248, 74249, 74250, 74251, 74254CP, 74255, 74256, 74261, 74262, 74262CP, 74262TE, 74272, 74272CP, 74273, 74273CP, 74280TE, 74283, 74284, 74291
- 744: 74410, 74412, 74413, 74414, 74415, 74416, 74418TE, 74421TE, 74441, 74442, 74448, 74449
2. Toro riding mower with 52″, 60″, 72″ deck:
- 74264TE, 74265TE, 74266CP, 74267CP, 74267, 74268, 74269, 74274CP, 74274, 74279TE, 74553, 74576, 74583, 79553
Replacement exmark lazer z part for:
3. Exmark (diesel) Lazer Z zero turn mower:
- AS: LAS23KC524, LAS25KC604, LAS28KA524 with 52″, 60″, 72″ deck
- HP: LHP19KA465, LHP20KC505, LHP23KA465, LHP23KA505 with 46″, 50″ deck
- XS: LXS25KD605, LXS25KD665, LXS25KD725, LXS29LKA605, LXS29LKA665 with 60″ deck
- E series: LZE651CKA484A2, LZE691KA524L, LZE730EKC604, LZE730GKA604A3, LZE730KA604 with 52″ deck
- S series: LZS651CKA484A2, LZS651CKA484A2, LZS651CKA484A2, LZS740AKC524A2, LZS740AKC524A2
- X series: LZX38KC726CA, LZX38KC726SS, LZX680KC486, LZX740EKC526, LZX740KC606 with 48″ 52″ 60″ 72″ deck
- Z series: LZZ29KCE606, LZZ34KA606, LZZ34KA726, LZZ34KC606, LZZ34KA726 with 48″ 52″ 60″ 72″ deck
4. Exmark walk behind and stand-on mower
- Turf tracer X series walk behind mower: TTX650EKC60400, TTX650EKC604N0, TTX680PKC60400, TTX691CKA60400
- Vantage stand-on mower: VT24KA524, VT24KA524CA, VT25EKC524, VT691KA524, VT691KA524CA
Reviews
There are no reviews yet.